Resilient_Customs and Dioramas - Madame Masque, Open Faceplate Stark, Warehouse Diorama WIP

[Resilient]

Figured I should start posting some work on here! So to start, here are my last custom from a few months back now.

First up, classic Madame Masque!

I loved that Hasbro included the Classic Madame Masque head with the modern version, of course I had to make a figure for it!

Recipe

Head: Madame Masque. The alternate head has hair swapped between the modern and classic versions as well.
Upper Body: Madame Masque
Abs: Sharon Carter
Arms: Shriek
Legs: Shriek
Boots: Shield Agent - Cut the boots off and used a screw join the parts and create a boot swivel.

This was a fun little project while I was waiting for paint to dry elsewhere.

I have plenty of Stark heads from the various 80th and 20th figures that I have. I heat and yanked the faceplate off and got to trimming and:

I was also recently commissioned to build a warehouse diorama over on Instagram. It's been fun the dust the ol' cobwebs off, but certainly forgot a thing or two in the planning stages that has slowed me down as I've had to go back and revise things a couple times. It's a huge piece coming in at 20x20x20 for the interior "play space" and the side wall will be able to be used on either side.

 

[Resilient]

Carved all my bricks out and started adding some "facade" onto my planned concrete sections. All the concrete elements will be about 1/8 of an inch off the main brick areas. I ended up needing to order a new guide rail for my hot wire cutter that was taller than the one that came stock to fabricate some of the longer/thicker thin strips needed to give the piece some dimensions (and hide magnets). It was on my list of things to get eventually anyway, but I'm really excited about the potential for future pieces now that I have it.

Took the "downtime" while i waited for the rail to arrive to work on and finish the asphalt floor. At this stage, my walls are finally ready for paint.